TAILIEUCHUNG - Calculation of the wave parameters for sea dyke design and upgrading

In the paper, the authors present the results of the project concerning the input data, wave models and the calculated wave parameters with different returning periods for 5 sectors along the coastal line from Quang Ninh to Quang Nam. The obtained results afford the promising of using in the sea dyke design and upgrading. | Vietnam Journal of Mechanics, VAST, Vol. 30, No. 4 (2008), pp. 259 – 267 Special Issue of the 30th Anniversary CALCULATION OF THE WAVE PARAMETERS FOR SEA DYKE DESIGN AND UPGRADING Nguyen Manh Hung1 , Nguyen Khac Nghia2 , and Duong Cong Dien1 1 Institute of Mechanics, Hanoi, Vietnam 2 Center for Estuary and Coastal Engineering (CECE), Hanoi, Vietnam Abstract. Sea dyke system is the effective mean for protecting the coastal low-lying areas from storm attack (the most dangerous storm induced phenomena are storm wave and surges). The coastal zone of Vietnam is blessed with wide variety of natural resources but at the same time, it is also a highly storm hazard-prone region. The storm number 7 (DAMREY) arrived in the East Sea from 26th to 28th of September 2005 and hit the south part of Red river delta coastal zone and caused sea dykes breaches at some stretches along the sea dyke system of the Nam Dinh province and big property damages of the local communes. In order to cope with the storm activity which is reinforced in the future by climate change, a Science Technology program on the sea dyke upgrading from Quang Ninh to Quang Nam provided by the Ministry of Agriculture and Rural Development has been implemented from April 2007. One of the program’s project is “Determining the wave heights for sea dyke designed along the coastal line from Quang Ninh to Quang Nam” with the object to propose a method for the calculation of the wave parameters with appropriate accuracy, simple for used and suitable for the natural condition of the different sectors of coastal line of Viet Nam from Quang Ninh to Quang Nam provinces and to upgrade and fulfill the wave calculation guideline for sea dyke design and upgrading. In the paper, the authors present the results of the project concerning the input data, wave models and the calculated wave parameters with different returning periods for 5 sectors along the coastal line from Quang Ninh to Quang Nam. The obtained results afford the

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• Calculation of the wave parameters
• Sea dyke design and upgrading
• The sea dyke design
• The coastal line
• The project concerning the input data
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure