TAILIEUCHUNG - Simulation of electrical properties of quartz crystal microbalance using multi-resonance thickness-shear mode technique

The theoretical analysis of MTSM has been developed to model and simulate the signature of the sensor responses at harmonic frequencies. The signatures of the evaporation- induced deposition processes were investigated by studying the effect of the thickness and stiffness of the medium. | Science & Technology Development, Vol 19, Simulation of electrical properties of quartz crystal microbalance using multi-resonance thickness-shear mode technique Tran Thi Minh Thu Tran Huy Thong Duong Tan Phuoc Ngo Vo KeThanh Nguyen Dang Giang Truong Huu Ly Nguyen Ngoc Viet IC Design Research and Education Center, VNU-HCM (Received on 2nd January 2016, accepted on 2nd December 2016) ABSTRACT The use of quartz crystal microbalance (QCM) in chemistry, biophysics, microbiology and electronics has grown tremendously in recent years. In this paper, the properties of a QCM sensor (a system include QCM device and viscoelastic medium) operating in the range of 5 MHz to 35 MHz of Multi-resonance ThicknessShear Mode (MTSM, n = 1, 3, 5, 7) are described. We calculate the changes both in resonant frequencies and attenuation of the QCM. The penetration depth of the shear waves propagating from quartz into loaded thin film varies in different values due to the harmonics, from which we infer the properties of the loaded thin film. The multi-harmonic operation of QCM was presented to collect the information of the loaded thin film on QCM’s electrode. This enables a “virtual slicing technique” because a harmonic relates to a different penetration depth even with the same material. The theoretical analysis of MTSM has been developed to model and simulate the signature of the sensor responses at harmonic frequencies. The signatures of the evaporation- induced deposition processes were investigated by studying the effect of the thickness and stiffness of the medium. Key words: Quartz crystal microbalance, Multi-resonance Thickness-Shear Mode INTRODUCTION The Quartz Crystal Microbalance (QCM) is a very sensitive device that measures the mass by detecting the change in vibrating frequency of the quartz crystal. The change in the frequency and attenuation of the crystal is proportional to the added mass and the viscosity of the medium. To design QCM usable .

• Hoá học
• Quartz crystal microbalance
• Multi resonance Thickness Shear Mode
• Harmonic frequencies
• The signatures of the evaporation
• The sensor responses
• Journal of Chemistry
• Blood glucose
• Human blood serum
• Liquid sensing
• Chemical gas sensing
• Volatile organic compound
• Vic dioxime
• Hydrogen bond acidity
• Carbohydrate polymers
• Layer by layer
• Galactomannan biopolymers
• Dioctadecyldimethylammonium bromide
• Surface acoustic waves
• Carbon nano tubes
• Advanced materials and devices
• Incorporating ZnO
• Incorporating CuO