Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Sau khi dành thời gian trong bốn chương đầu tiên đặt nền tảng cho quá trình hội nhập, chúng ta có thể bắt đầu tập trung sự chú ý của chúng tôi về quá trình thực tế bản thân. Trong chương này và một số kế tiếp theo, chúng tôi sẽ sử dụng ISO 14001 lớn các yếu tố (Chính sách, Kế hoạch, thực hiện và hoạt động, Kiểm tra và hành động sửa chữa, và Tổng quản lý) như là một cơ sở được xây dựng dựa trên khi chúng tôi đi qua quá trình này. Ví dụ, chương. | Part II Integrating The Policy 1998 CRC Press LLC 5 The Policy 5.1 INTRODUCTION Having spent time in the first four chapters laying down a foundation for the integration process we can now begin to focus our attention on the actual process itself. In this chapter and the next several to follow we will use the major ISO 14001 elements Policy Planning Implementation and Operation Checking and Corrective Action and Management Review as a base to be built upon as we go through this process. For instance this chapter will use ISO 14001 Element 4.2 Environmental Policy as the starting point and then see how various quality systems can be integrated with it. Each of these chapters will be organized in a similar format which will include an evaluation of the various Quality Management System and Environmental Management System requirements what a combined management system can or might look like and what an auditor might look for if a joint QMS and EMS audit were conducted. Each requirement will be dissected in order to provide a better overall picture to view the integration process. Additionally any differences that cannot be integrated will be discussed. In Appendix B I have provided a very detailed table that shows the crossreferencing between ISO 9001 and ISO 14001. This table will provide the primary foundation for the integration being discussed in the following chapters. In addition Appendix C shows a comparison of the two ISO standards British Standard 7750 and the Eco-Management Audit Scheme. 5.2 ISO 9001 REQUIREMENTS The U.S. Automotive requirements for ISO 9001 QS-9000 will be evaluated primarily in conjunction with ISO 9001 and will on occasion be evaluated separately for specific QS-9000 requirements as they come up. In the case of establishing a policy there are not separate requirements between the two standards. The requirements for a quality policy are found under Section 4.1 Management Responsibility Section 4.1.1 of ISO 9001 states The supplier s .
