Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành hóa học dành cho các bạn yêu hóa học tham khảo đề tài:Initial development and testing of a novel foam-based pressure sensor for wearable sensing | Journal of NeuroEngineering and Rehabilitation BioMed Central Research Open Access Initial development and testing of a novel foam-based pressure sensor for wearable sensing Lucy E Dunne 1 Sarah Brady2 Barry Smyth1 and Dermot Diamond2 Address 1Adaptive Information Cluster Department of Computer Science University College Dublin Belfield Dublin 4 Ireland and 2Adaptive Information Cluster National Centre for Sensor Research Dublin City University Dublin 9 Ireland Email Lucy E Dunne - lucy.dunne@ucd.ie Sarah Brady - sarah.brady4@mail.dcu.ie BarrySmyth - barry.smyth@ucd.ie Dermot Diamond - dermot.diamond@dcu.ie Corresponding author Published 01 March 2005 Received 06 January 2005 Journal of NeuroEngineering and Rehabilitation 2005 2 4 doi 10.1186 1743-0003-2-4 Accepted 01 March 2005 This article is available from http www.jneuroengrehab.cOm content 2 1 4 2005 Dunne et al licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License http creativecommons.org licenses by 2.0 which permits unrestricted use distribution and reproduction in any medium provided the original work is properly cited. Abstract Background This paper provides an overview of initial research conducted in the development of pressure-sensitive foam and its application in wearable sensing. The foam sensor is composed of polypyrrole-coated polyurethane foam which exhibits a piezo-resistive reaction when exposed to electrical current. The use of this polymer-coated foam is attractive for wearable sensing due to the sensor s retention of desirable mechanical properties similar to those exhibited by textile structures. Methods The development of the foam sensor is described as well as the development of a prototype sensing garment with sensors in several areas on the torso to measure breathing shoulder movement neck movement and scapula pressure. Sensor properties were characterized and data from pilot tests was examined visually. .
