Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Haas Factory Outlet A Division of Productivity Inc Mill Series Training Manual Haas CNC Mill Operator Revised 022613 (032512) (printed 022613) .This Manual is the Property of Productivity Inc The document may not be reproduced without the express written permission of Productivity Inc. The content must not be altered, nor may the Productivity Inc name be removed from the materials. This material is to be used as a guide to operation of the machine tool. The Operator is responsible for following Safety Procedures as outlined by their instructor or manufacturer s specifications. To obtain permission, please contact trainingmn@productivity.com. .Haas CNC Mill Operator Manual Table of Contents INTRODUCTION. | Haas Factory Outlet A Division of Productivity Inc Mill Series Training Manual Haas CNC Mill Operator Revised 022613 032512 printed 022613 This Manual is the Property of Productivity Inc The document may not be reproduced without the express written permission of Productivity Inc. The content must not be altered nor may the Productivity Inc name be removed from the materials. This material is to be used as a guide to operation of the machine tool. The Operator is responsible for following Safety Procedures as outlined by their instructor or manufacturer s specifications. To obtain permission please contact trainingmn@productivity.com. Haas CNC Mill Operator Manual Table of Contents INTRODUCTION TO BASIC VERTICAL MILL OPERATION.5 THE CARTESIAN COORDINATE SYSTEM.7 ABSOLUTE AND INCREMENTAL POSITIONING.8 Absolute and Incremental Exercise.9 VERTICAL MACHINING CENTER TRAVELS.12 THE MACHINE COORDINATE SYSTEM - MACHINE HOME POSITION.14 Work Coordinate System.15 TOOL LENGTH OFFSET.18 THE HAAS CNC CONTROL.19 CONTROL DISPLAY.20 KEYBOARD INTRODUCTION.21 1 - Function Keys.22 2 - Jog Keys.22 3 - Override Keys.23 4 - Display Keys.24 5 - Cursor Keys.28 6 and 7 - Alpha Keys and Numeric Keys.28 8 - Mode Keys.30 SETTINGS.33 ATC AUTOMATIC TOOL CHANGE .36 SETTING TOOL LENGTH WORK ZERO OFFSETS.37 SET UP PROCEDURE.38 work offsets X and y part zeros .38 tool length offsets. 38 program proofing and running in memory.38 COMMUNICATIONS.39 HAAS MILL CONTROL TIPS.41 general tips.41 control tips.41 PRGRM CONVRS.42 posit Position .
