Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Tham khảo tài liệu 'dimensioning and tolerancing part 16', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | .1.6.3 1.7.1 1.9.2 . 1.8.15 2.5 .1.8.3 Dimensioning Coat d Decimal Points. Dimension Lines. Dimensioning Features Chamfers. Chords Arcs and Angles Counterbored Holes.1.8.11 5.7 Counterdrilled Holes.1.8.12 A3 Countersunk Holes.1.8.12 Diameters.1.8.1 2.13 4.3.1 4.5.2-4 5.3 4.5.7 5.11.1 6.7.1 6.8.3 B3 Grid System.1.8.7 Irregular Outlines.1.8.7 Keyseats.1.8.16 Knurling. 1.2 1.8.17 Machining Centers.1.8.14 Outlines Consisting of Arcs.1.8.6 Radii.1.8.2 1.8.4 1.8.6 1.8.10 1.8.18 2.5 2.15.1-2.15.2 63 D4 Rods and Tubing Details.1.8.18 Round Holes.1.8.9 1.8.15 Rounded Comers.1.8.5 Rounded Ends.1.8.4 Slotted Holes.1.8.10 Spotfaces.1.8.13 Surface Texture.1.2 1.8.20 Symmetrical Outlines.1.8.8 Dimensions Not to Scale.1.7.9 Extension Ones.1.7 1.7.2 1.7 5 1.7.8 1.8.2 1.9.2 Leaders. . . . . 1.7. 1.7.4 6.7.1 Limited Length.1.7.3 Millimeter Dimensioning.1.6.1 Overall Dimensions.1.7.7 Polar Coordinate Dimensioning.1.9.4 Reading Direction.1.7.5 Rectangular Coordinate Dimensioning.1.9.1-1.9.2 Reference Dimensions.1.7.6 Repetitive Features.1.9.5 Tabular Dimensioning.1.9.3 Use of X By .1.9.6 E Envelope Actual Mating.1.3.11 Equalizing.4.6.6 A6 F Feature External.1.3.11 Axis.1.3.13 Center Plane.1.3.14 Derived Median Line of.1.3.16 Derived Median Plane of.1.3.15 Internal.1.3.11 Size of . 1.4 2.7-2.7.1 Feature Control Frame.3.4.1-3.4.4 3.4.6-3.4.7 Feature of Size.1.3.17 2.7.1 A7-A8 Features to be Restrained.6.8.2 Flatness.2.7.1 62-6.3 6.4 6.4.2 6.5.6. 6.6.1.6.7.1 Forgings. 1.8.22 4.3.1 A3 Form and Orientation Control Average Diameter.6.8.3 Composite Profile.63.9 Coplanarity.4.5.7 6.5.6 Form and Orientation Tolerance Zones.6.3.1 Form Tolerances Circularity . 4.5.4 6.2 6.4 6.4.3-6.44 6.7.1 6.8.3 Cylindricity.4.5.4. 6.2 6.4. 6.4.4 6.7.1 Flatness . .2.7.1 6.2-63 6.4 6.4.2 6.5.6 6.6.1 6.7.1 Straightness.2.7.1 4.5.4 6.2 6.4-6.4.1 6.4.4 6.7.1 A4. A8 Geometric Tolerances on Features to be Restrained.6.8.2 Orientation Tolerances Angularity.2.7.3 2.12 6.2 6.6-6 6.2. 6.7.1 A8 In Relation to Datum .