Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
1 VLAN cho phép trên một thân cây khi phạm vi của VLAN được cho phép được thiết lập để giá trị mặc định? Tất cả các VLAN sẽ được cho phép trên thân cây. Chỉ có VLAN 1 sẽ được cho phép trên thân cây. | Kiều Đình Luân 1 What VLANs are allowed across a trunk when the range of allowed VLANs is set to the default value Switch 1 VLAN20 Ports 2 5. 6 8 11 VLAN30 Ports 3 4 9 IP Address 192.168.3.250 28 Hostl IP Address 192.168.1.2 24 Default Gateway 192.168 1.1 24 Host2 IP Address 192.168.2.2 24 Default Gateway 192.168.2.1 24 Refer to the exhibit. What three statements describe why Hostl and Host2 are unable to communicate Che three. _l The switch ports are on different VLANs. _l The switch IP address is on the wrong subnet. _l The hosts are configured on different logical networks. _l A router is required to forward traffic between Hostl and Host2. I The VLAN port assignments must be contiguous for each VLAN. l The host default gateway addresses must be on the same logical network. 8 GĨ1 1 SWT-A GĨ1 2 S WT B SWT-A show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority Address Hello Time Bridge ID Priority Address Aging Time 32769 0090.0086. CA14 2 sec Max Age 20 sec Forward Delay 15 sec 32769 priority 32768 sys-id-ext 1 00E0.B0eA.3A25 300 Interface Role Sts Cost Prio.Nbr Type GÍ1 1 Root FWD 4 128.3 Shr GÍ1 2 Altn BLK 4 128.3 Shr Refer to the exhibit. How is port Gil 1 on SWT-A functioning in the spanning-tree topology
