Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Tham khảo tài liệu 'krone highband ultim8tm 8 pair disconnection modules', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | KRONE HIGHBAND Ultim8 8 Pair Disconnection Modules Maximum Headroom beyond Category 6 Class E transmission performance KRONE HIGHBAND Ultim8 8 Pair Disconnection Modules Application Approvals Superior high speed data and voice cross connect modules that far exceed Category 6 component standards. HIGHBAND Ultim8 is an 8 pair disconnect module to enable high speed LAN and WAN systems maximum headroom beyond Category 6 Class E transmission performance. HIGHBAND utilises the silver plated LSA Plus contact principle. This is proven technology which has become the industry standard in over 60 countries. The gas tight contacts ensure a reliable and long lasting connection. These modules can be used in a fully patched configuration or jumpered utilising the patch by exception concept. see notes Technical Specifications ACA Compliant UL Certified Performance Ultim8 - PS NEXT - Patched Environment for use .Indoors in dry closed rooms Operating temperature range .-10 C to 60 C Maximum relative humidity 93 non-condensing Transmission performance and reliability Exceeds the ISO IEC 11801 Cat. 6 Class E standard Number of patching cycles .750 Number of wire reterminations . 200 Wire diameter range for solid and stranded copper conductors .0.40 - 0.65mm 26-22 AWG Wire insulation diameter range PE PVC .0.70 - 1.40mm Ultim8 - PS NEXT - Jumpered Patch by Exception Voltage rating .150 VAC Insulation resistance .1000 M at 500 VDC Safety .UL 1863 Flammability rating of plastic housing .UL 94 VO Notes Part Numbers HIGHBAND Ultim 8 .6468 5 060-06 Pack of 10 KRONE a When installing patch cords ensure that the latch is located at the bottom of the module and that it clips into the holes provided. b For more information on the KRONE Patch by Exception concept please contact your nearest KRONE representative A maximum of 2 equal diameter solid conductors only of up to 0.5 conductor diameter can be terminated per slot. Only 1 conductor of stranded wires per slot can be terminated. If any .
