Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Tham khảo tài liệu 'krone - datasheet - highband - cat 6 - 25 pr', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | 23® DESCRIPTION: HIGHBAND 25 CATEGORY 6 MODULE PART #: 6468 2 600-00 PRODUCT DESCRIPTION AND APPLICATION The HIGHBAND 25 RANGE of modules provides a 24 pair high-density, high performance, cost competitive Category 6 data grade module, (the 25th pair is not used) and a high-density cost competitive 25 pair Category 3 voice grade module to accept UTP & STP copper cables. It will supplement the existing HIGHBAND™ Range of modules. The upper and lower shell are moulded in PBT. The Category 6 shield is manufactured from tin plated mild steel. The module is designed for mounting on a backmount frame. Modules are terminated with the standard KRONE termination tools 6089 2 003-00 or 6417 2 055-01. Module may also be terminated with a 110 tool. A range of accessories is available for mounting, patching, labelling, numbering and disconnecting. TECHNICAL SPECIFICATIONS Environment for use: Indoors or in dry enclosure rated IP54 or greater. Operating temperature range: -40°C to +80°C Maximum relative humidity: ≤ 93% non-condensing Wire range for solid & stranded copper conductors: 0.4-0.65 (26-22 AWG)* * A maximum of 2 equal, solid conductors only, of up to 0.5 conductor diameter can be terminated per slot. Only 1 conductor of stranded wires per slot can be terminated. If any conductors >0.5 have been terminated, reversal to smaller conductors in no longer possible. Wire insulation diameter range (PE, PVC): Typically 0.7-1.4 Number of wire reterminations: Up to 200 Wire insertion force (0.5 conductor diameter): 6N Wire pull out force, radial (0.5 conductor diameter): 5N Wire pull out force, axial (0.5 conductor diameter): 35N Number of patching cycles, Modules: Up to 750 Patch plugs: Up to 200 Transmission & reliability: CAT 6 module: Meet & exceed Category 6 std. (ISO 11801 & TIA/EIA 568-B.2-1) CAT 3 module: Meet & exceed Category 3 std. (ISO 11801 & TIA/EIA 568-B.2) Change of contact interface resistance after reliability testing < 5mΩ Typical to ISO/IEC 11801 and TIA/EIA .
