Đang chuẩn bị liên kết để tải về tài liệu:
Removal of heavy metals derived from COD analysis wastewater by electrolysis using graphite electrode

Trúc Phương 50 7 pdf

Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ Tải xuống

The results showed that the electrolysis process was not affected by the electrode’s distance or area. The most efficient treatment for all three metals was achieved at a current value of 31.58 mA, which corresponds to a current density of 1.974 mA/cm2 under a voltage of 3 V, 8-h electrolysis time, wastewater pH |

TÀI LIỆU LIÊN QUAN

Simultaneous removal of some heavy metals and arsenic from aqueous solutions by phragmites australis

Adsorptive removal of five heavy metals from water using blast furnace slag and fly ash

A study of the removal characteristics of heavy metals from wastewater by low-cost adsorbents

A review on biosorptive removal of dyes and heavy metals from wastewater using watermelon rind as biosorbent

Removal of heavy metals present in water from the Yautepec River Morelos Mexico, using Opuntia ficus-indica mucilage

Application of acid modified red mud for lead ion removal from aqueous solution

Removal of heavy metals derived from COD analysis wastewater by electrolysis using graphite electrode

Removal of nickel, copper, and zinc ions from aqueous solution using coffee bean husk (CFH)

Copper doped zeolite composite for antimicrobial activity and heavy metal removal from waste water

Ulvan dialdehyde-gelatin hydrogels for removal of heavy metals and methylene blue from aqueous solution

Đã phát hiện trình chặn quảng cáo AdBlock

Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.