Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
A low cost column mode device was designed and fabricated for removal of trivalent and pentavalent arsenic from water. The chemically modified chitosan was entrapped in polyurethane matrix and used as a column bed for adsorption for both the forms of arsenic. The chemical modification of chitosan was achieved by pre-treatment with ferrous oxide manganese oxide. The column bed exhibited 75% of As(III) and 72 % of As(V) removal at 1000 ppb concentration. The flow rate of the arsenic solution through column matrix directly influenced the removal and the flow rate of 100 mL min-1 showed two to three folds higher removal of arsenic as compared to 200 mL min-1 . The design and the process of preparation of chemically modified chitosan are the novel findings of the study. | Application of chemically modified chitosan for removal of arsenic from water: A column bed experiment
