TAILIEUCHUNG - Bond-Graph based simulation of sensors and piezoelectric beams’ ranges in energy recovery circuit

Currently, with the disappearance of fossil energy sources, finding new alternative energy sources is very necessary such as: solar energy, wind energy, tidal energy, flow energy, . However, these energy sources require high investment capital, large capacity, and bulky size. In circuits requiring small power sources (below 12V), it is not applicable, or only used through intermediate devices such as transformers, current transformers; Therefore, the application of energy from mechanical vibration has been proposed as an optimal measure compared to the above methods Energy recovery from mechanical vibration is the activity of reusing a part of the energy generated when there is a fluctuation with a constant frequency on solid surfaces. Mechanical vibrations occur mostly in production systems, and it also causes some damage. |

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.