TAILIEUCHUNG - Lecture Electric circuits analysis - Lecture 15: Problem solving - series parallel circuits

In this chapter, the following content will be discussed: Identifying series-parallel relationships, analysis of series-parallel resistive circuits, voltage dividers with resistive loads, ladder networks. | Previous Lectures 13 & 14 Problem Solving-Series Parallel Circuits Identifying Series-Parallel Relationships Analysis of Series-Parallel Resistive Circuits Voltage Dividers with Resistive loads Ladder Networks Problem Solving_Series Parallel Circuits Position 1: RT= kΩ, V1 = V, V2 = V, V3 = The voltage divider in the following Figure has a switched load. Determine the voltage at each tap (V1, V2 , and V3 ) for each position of the switch. (Solved on 3 slides) Lecture 15 Position 2 :RT= kΩ, R34//RL= Ω , V1=, V2= V, V3= Position 3:RT= kΩ, V1=89V, V2=58 V, V3=27V Design a voltage divider to provide a 6V output with no load and a minimum of V across a kΩ load. The source voltage is 24 V, and the unloaded current drain is not to exceed 100 mA. RT=240 Ω, R2=60 Ω, R1= 180 Ω, R2

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.