TAILIEUCHUNG - Lecture Ethernet LANs: Understanding Switch Security

The main contents of this chapter include all of the following: The first level of security is physical, passwords can be used to limit access to users that have been given the password, the login banner can be used to display a message before the user is prompted for a username,. | Ethernet LANs Understanding Switch Security Common Threats to Physical Installations Hardware threats Environmental threats Electrical threats Maintenance threats Configuring a Switch Password Layer 2 of 2 Emphasize: The router has one enable password. Remember that this is your only protection. Whoever owns this password can do anything with the router, so be careful about communicating this password to others. To provide an additional layer of security, particularly for passwords that cross the network or are stored on a TFTP server, you can use either the enable password or enable secret commands. Both commands accomplish the same thing; that is, they allow you to establish an encrypted password that users must enter to access enable mode (the default), or any privilege level you specify. Cisco recommends that you use the enable secret command because it uses an improved encryption algorithm. Use the enable password command only if you boot an older image of the Cisco IOS software,

Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.