TAILIEUCHUNG - Equipment Risk, Training and Maintenance

WHO has not reviewed the safety, efficacy, quality, applicability, or cost acceptability of any of the technologies referred to hereafter. Therefore, inclusion of the aforesaid fact sheets herein does not constitute a warranty of the fitness of any technology or of any resulting product and any future development thereof, for a particular purpose. Besides, the responsibility for the quality, safety and efficacy of each technology or each resulting product remains with its developer, owner and/or manufacturer. WHO will not be held to endorse nor to recommend any technology or any resulting product thereof, as such or in preference to others. | Department of Chemistry UOW Equipment Risk Training and Maintenance 1. Purpose In a chemical laboratory a high risk environment may not simply be limited to the use of hazardous substances. Some instruments either through direct use or in maintenance may place a student or staff member at some risk. This guideline outlines the identification of hazards and control measures to aid in the completion of an equipment risk assessment in order to minimise risks that may be associated with laboratory equipment. It also requires the entry of equipment information into an equipment register. 2. Scope This guideline and associated documentation should be read by all laboratory supervisors and managers that have students and staff operating a piece of equipment. 3. References Risk Management Guidelines http ohs managingrisk Risk Assessment http ohs managingrisk 3 4. Definitions Category 1 equipment A complex piece of equipment or one with medium -high risk that requires formalised training and assessment of competency before use. Category 2 equipment. Equipment which has medium complexity or risk requiring simple training for use. Category 3 equipment. Equipment that requires little training and is of low risk. Trainer. The person nominated by the supervisor to carry out training for a particular piece of equipment. Major equipment facility In the Department of Chemistry major equipment facilities are considered to be the NMR facility and Mass Spectrometry Facility. 5. Procedure . Identify the equipment under your Supervision Identify the major equipment in your laboratory area and enter the name manufacturer and model number in the equipment register Appendix 1 eg. 300MHz NMR spectrometer Varian Mercury Vx. Include any meaningful identifiers. If possible also include the asset number. Some pieces of equipment may have more than one asset number. List those you consider most relevant.

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.