TAILIEUCHUNG - sybex ccna fast pass 3rd edition 2007 phần 8

tôi đã không bao gồm chạy-config hoàn chỉnh của tôi, nhưng tôi đã hiển thị tất cả những gì bạn cần. Bạn có thể thấy hai được xây dựng trong các giao diện Ethernet nhanh, hai giao diện nối tiếpNhưng nếu bạn có tên người dùng sai, như chúng ta đã làm trước đó trong trở lại ví dụ xác thực PPP thất bại trong hình 14,11 | Configure and apply ACLs based on network filtering requirements 323 Let s take a look at the syntax used when creating a standard access list Corp config access-list 10 deny Specify packets to reject permit Specify packets to forward remark Access list entry comment As I said by using the access-list numbers 1-99 or 1300-1999 you re telling the router that you want to create a standard IP access list. After you choose the access-list number you need to decide whether you re creating a permit or deny statement. For this example you will create a deny statement Corp config access-list 10 deny Hostname or Address to match any Any source host host A single host address The next step requires a more detailed explanation. There are three options available. You can use the any parameter to permit or deny any host or network you can use an IP address to specify either a single host or a range of them or you can use the host command to specify a specific host only. The any command is pretty obvious any source address matches the statement so every packet compared against this line will match. The host command is relatively simple. Here s an example using it Corp config access-list 10 deny host Hostname or Host address Corp config access-list 10 deny host This tells the list to deny any packets from host . The default parameter is host. In other words if you type access-list 10 deny the router assumes you that mean host . But there s another way to specify either a particular host or a range of hosts you can use wildcard masking. In fact to specify any range of hosts you have to use wildcard masking in the access list. Wildcard Masking Wildcards are used with access lists to specify an individual host a network or a certain range of a network or networks. To understand a wildcard you need to understand what a block size is it s used to specify a range of addresses. Some of the different block sizes available

Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.