TAILIEUCHUNG - Installing, Troubleshooting, and Repairing Wireless Networks phần 7

phải để thiết lập lại nó với giá trị mặc định nhà máy và bắt đầu lại từ đầu. Chúng tôi vẫn sống trong một thời đại mà ăng ten và, ở một mức độ, thiết bị lớn hơn. Tần số cao hơn dictate ăng-ten và thiết bị nhỏ hơn, nhưng cần nhiều quyền lực hơn (cũng có nghĩa là trang thiết bị) | Creating a SOHO Wireless Network 231 Figure The LinkSys router password security configuration page. be given private nonroutable IP addresses from either the or address ranges. The LinkSys by default comes configured to use the address range giving us a place to start. Using default settings is OK in a private home network but at work with several other users tinkering about you probably want to select a different address range and change the default password for the router to reduce the chances of tampering. The Host Name and Domain Name options are optional and I have never found them as suggested to be required by some ISPs 232 Chapter 13 unless you have fixed IP addressing and they are changing their DNS servers to suit your installation not likely . I address my network into what I call the 10-net range if only because it is easier to type than when configuring fixed addresses into workstations. Thus becomes the router s new IP address. This IP address is then used as the gateway address on client workstations that do not use DHCP automatic client configuration values. The subnet mask numbers tell the router if connections between specific hosts addresses need to go through the router to the WAN port DSL line or remain on the LAN side. Since we do not have a big network over 255 clients we can use a Class C or smaller mask value. If we had multiple subnets we could narrow the last octet of the mask down to typically .224 .192 .128 or other values defining how many host addresses live within each subnet of our address range. The Class C value is the easiest. If we had a situation to support more subnets we could as easily make them use etc. network ranges. Next we have to configure how the router will work with the DSL service see Figure for the WAN connection type values. If you have business DSL service with fixed IP .

TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.