TAILIEUCHUNG - Báo cáo " Diffusion behaviour of corrosive solution environments in carbon black filled modified polyethylene linings "

The diffusion behaviour of water and HCl solution at different temperatures and concentrations into a modified polyethylene filled with carbon black used for lining is presented. It has shown the predominant role of nature of environment and carbon black content. In the both environments, an increase of environmental temperature increased the capacity of environmental absorption and the diffusion rate. | VNU Journal of Science Mathematics - Physics 26 2010 71-81 Diffusion behaviour of corrosive solution environments in carbon black filled modified polyethylene linings Chau Van Dinh1 M. Kubouchi2 1Department of Physical Engineering and Nano Technology University of Technology and Engineering VNU 144 Xuan Thuy Cau Giay Hanoi Vietnam 2Department of Chemical Engineering Graduate School of Science and Engineering Tokyo Institute of Technology 2-12-1 Ookayama Meguro Tokyo. 152-8552 Japan Received 15 December 2009 Abstract. The diffusion behaviour of water and HCl solution at different temperatures and concentrations into a modified polyethylene filled with carbon black used for lining is presented. It has shown the predominant role of nature of environment and carbon black content. In the both environments an increase of environmental temperature increased the capacity of environmental absorption and the diffusion rate. The lower sorption capacity was observed at 40 and 60 oC while a higher at 80oC in the water. The two-stage diffusion appeared for the case of the corrosive environment at 80oC. An increase of carbon black loading was increased both diffusion rate and saturation values. Diffusion of the environment into the polymer proposed by the following environmental molecules diffusing into the polymer matrix through porous system were trapped by functional groups on the carbon black surface and polymer molecule chain and are immobilized. This explains the increase of sorption capacity when increase carbon black loading. Keywords modified polyethylene composites lining diffusion chemical degradation. 1. Introduction The service life of polymeric lining coating-iron steel system is limited by degradation and diffusion phenomenon. The polymeric lining coating layer is required to have high resistance against its working corrosive environment low environmental diffusion rate and high adhesion on substrate. Polyethylene PE is considered as a good material for lining .

TỪ KHÓA LIÊN QUAN
TÀI LIỆU MỚI ĐĂNG
10    174    3    30-11-2024
8    150    2    30-11-2024
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.