TAILIEUCHUNG - PSIM User Manual phần 7

Các thuộc tính: Tham số mảng Length giá trị Hồ sơ Mô tả hệ số chiều dài của mảng dữ liệu N (ARRAY chỉ) giá trị của các mảng (ARRAY chỉ) Tên của các tập tin lưu trữ các mảng (array1 chỉ) Nếu mảng được đọc từ một tập tin, tập tin sẽ có định dạng sau: N a1 . . . N mà là chiều dài của mảng, và a1 | Digital Control Module Example Let a vector be A 2 4 6 8 if index offset is 0 the memory read block output is 2. If the index offset is 2 the output is 6. Data Array This is a one-dimensional array. The output is a vector. Image ARRAY ARRAY1 Attributes Parameters Description Array Length Values File for Coefficients The length of the data array N for ARRAY only Values of the array for ARRAY only Name of the file storing the array for ARRAY1 only If the array is read from a file the file will have the following format N a1 aN where N is the length of the array and are the array values. Example To define an array A 2 4 6 8 we will have Array Length 4 Values 2 4 6 8. If the array is to be read from a file the file will be 4 2. 4. 6. 8. Stack PSIM User Manual 3-35 Chapter 3 Control Circuit Components A stack is a first-in-last-out register. Image V. in _Ị push STACK V pop Attributes Parameters Description Stack Depth The stack depth The rising edge triggers the push or pop action. When a pop action is performed and the stack is empty the output remains unchanged. When a push action is performed and the stack is already full the data at the bottom of the stack will be pushed out and will be lost. Multi-Rate Sampling System A discrete system can have more than one different sampling rate. The following system is used to illustrate this. The system below has 3 sections. The first section has a sampling rate of 10 Hz. The output Vo fed back to the system and is sampled at 4 Hz in the second section. In the third section the output is displayed at a sampling rate of 2 Hz. It should be noted that a zero-order hold must be used between two elements having different sampling rates. 3-36 PSIM User Manual SimCoupler Module SimCoupler Module The SimCoupler Module as an add-on option to the PSIM software provides interface between PSIM and Matlab Simulink for co-simulation. With the SimCoupler Module part of a system can be implemented and simulated in

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.