TAILIEUCHUNG - Báo cáo hóa học: " Fabrication of Carbon Nanotube/SiO2 and Carbon Nanotube/ SiO2/Ag Nanoparticles Hybrids by Using Plasma Treatment"

Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành hóa học dành cho các bạn yêu hóa học tham khảo đề tài: Fabrication of Carbon Nanotube/SiO2 and Carbon Nanotube/ SiO2/Ag Nanoparticles Hybrids by Using Plasma Treatment | Nanoscale Res Lett 2009 4 1384-1388 DOI s11671-009-9409-4 NANO EXPRESS Fabrication of Carbon Nanotube SiO2 and Carbon Nanotube SiO2 Ag Nanoparticles Hybrids by Using Plasma Treatment Haiqing Li Chang-Sik Ha Il Kim Received 24 April 2009 Accepted 30 July 2009 Published online 13 to the authors 2009 Abstract Based on plasma-treated single wall carbon nanotubes SWCNTs SWCNT SiO2 and thiol groups-functionalized SWCNT SiO2 hybrids have been fabricated through a sol-gel process. By means of thiol groups Ag nanoparticles have been in situ synthesized and bonded onto the SiO2 shell of SWCNT SiO2 in the absence of external reducing agent resulting in the stable carbon nanotube SiO2 Ag nanoparticles hybrids. This strategy provides a facile low-cost and green methodology for the creation of carbon nanotube inorganic oxides-metal nanoparticles hybrids. Keywords Carbon nanotubes Nanocomposites Plasma treatments Silica Silver nanoparticles Introduction Carbon nanotube CNT inorganic composites are a new type of functional materials that gained tremendous interest in recent decades owing to their exceptional optical mechanical electrical and thermal properties thus enabling the use in photochemical catalytic and electrochemical technologies 1-3 . To date varied CNT-based composite structures resulting from the deposition of metallic semiconducting and insulating nanoparticles nano lusters on the CNT side walls have been created successfully 4-6 . H. Li . Ha I. Kim H The WCU Center for Synthetic Polymer Bioconjugate Hybrid Materials Department of Polymer Science and Engineering Pusan National University Pusan 609-735 Korea e-mail ilkim@ August 2009 To efficiently synthesize CNT-based nanocomposites it is necessary to activate the graphitic surface of CNT that tend to be chemical inert and lack of dispersibility in solvents. In this direction many synthesis strategies have been designed to covalently or non-covalently decorate the side walls of the CNTs with .

TÀI LIỆU LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.