TAILIEUCHUNG - Oracle9i Installation Guide phần 5

Để cải thiện an ninh cho các quá trình cơ sở dữ liệu và ứng dụng, tạo người dùng Apache. Cấu hình Oracle HTTP Server để chuyển quyền sở hữu của các quá trình của nó từ gốc cho người sử dụng Apache bằng cách sử dụng các tham số cấu hình sử dụng Apache, mà reset người sử dụng quyền sở hữu của các quá trình sinh ra bởi | Installation Mount Options 3. Mount the CD-ROM drive on the mount point directory by using the following commands mount options device_name cdrom_mount_point_directory 4. Exit the root account. exit If you are unsure of the correct device_name consult your system administrator. Typically the device_name is dev cdrom. Example 3-2 shows how to mount the CD-ROM manually. Example 3-2 Mounting the Linux CD-ROM Manually su root mkdir cdrom mount -t iso9660 dev cdrom cdrom exit If you run the Installer while the current working directory is in the CD-ROM follow these steps to mount the next CD-ROM 1. Change directory to the root directory of your system and log in as the root user by using the following commands cd su root 2. Unmount the CD-ROM by using the following command umount cdrom_mount_point_directory 3. Remove the CD-ROM from the CD-ROM drive. 4. Insert the next CD-ROM into the CD-ROM drive and then use the following command to mount it mount cdrom_mount_point_directory 5. Enter the correct mount point in the Installation dialog box of the Oracle Universal Installer. 6. Click OK to continue. 3-6 Installation Guide Installation Mount Options Mounting CD-ROMs for Solaris Mount disk 1 to begin the installation. Mount the subsequent disk or disks when prompted. Mounting CD-ROMs for Solaris with Volume Management Software If you are using Volume Management software available by default on Solaris the CD-ROM is mounted automatically to the cdrom orcl92010_1 directory when you insert it into the CD-ROM drive. Proceed to Oracle Universal Installer on page 3-10. To check if you have Volume Management software use the following command ps -e grep void If you have Volume Management software the output must be similar to the following 404 16 03 void If the Volume Management software is running the CD-ROM is mounted automatically. Use the following commands to unmount subsequent CD-ROMs cd eject After entering these commands proceed to Oracle Universal Installer on page 3-10.

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.