TAILIEUCHUNG - Nortel Guide to VPN Routing for Security and VoIP phần 5

Distinguished Name hoặc thay thế một tên Tiêu đề có thể được sử dụng để nhận dạng duy nhất Nortel VPN Router. Nếu thay thế Tên Chủ đề được chọn từ giấy chứng nhận Nortel VPN Router, sau đó nhận dạng được sử dụng tại chỗ của các DN chủ đề của Router | Authentication 273 Distinguished Name or a Subject Alternative Name can be used to uniquely identify the Nortel VPN Router. If Subject Alternative Name is selected from the Nortel VPN Router s certificate then that identity is used in place of the Router s subject DN when it communicates with peers. The Nortel VPN Router server certificate has only a Subject Alternative Name if the CA issues the certificate with alternative names. For example while using Entrust PKI the VPN connector can issue certificates with Email DNS names or IP addresses as alternative names. The Local Identity Server Certificate drop-down menu displays all the certificates that have been issued to the Nortel VPN Router and were configured from the Generate Certificate Request screen which is selected from the SYSTEM main menu and the CERTIFICATES submenu. Select the appropriate certificate that the Nortel VPN Router is to be identified and authenticated with. L2TP IPSec Authentication You can either edit or create a new BOT to use L2TP by selecting PROFILES on the main menu and then BRANCH OFFICE to bring up the Branch Office configuration screen. Either select a tunnel to edit and click the Configure button or click the Add button to add a new BOT connection. In the Connection Configuration Screen portion of the screen select L2TP from the Tunnel Type drop-down menu. After the screen has been refreshed scroll down to the Authentication portion of the screen as shown in Figure 6-30. be disabled. HERTEL_ NETWORKS Figure 6-30 L2TP authentication configuration 274 Chapter 6 Perform the following steps to configure L2TP authentication on the Nortel VPN Router 1. Enter the ID of the local Nortel VPN Router that you are currently configuring in the Local UID field. 2. In the Peer UID field enter the user ID of the remote peer Nortel VPN Router connection for which this tunnel is being configured. 3. Enter the password that is being used for the Local UID of the local Nortel VPN Router in both .

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.