TAILIEUCHUNG - Modelling with AutoCAD 2011 Part 9

Tham khảo tài liệu 'modelling with autocad 2011 part 9', kỹ thuật - công nghệ, cơ khí - chế tạo máy phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | Solids editing 233 6 Select the COPY FACES icon from the Solids Editing toolbar and prompt Select faces respond pick face 2 then right-click enter prompt Specify a base point or displacement respond Endpoint icon and pick pt3 prompt Specify a second point of displacement enter @50 0 100 R then exit the command 7 The selected face is copied as fig d 8 Erase all objects from the screen and create two primitives a cylinder centre 0 0 0 radius 30 height 100 b cone centre 0 0 200 radius 100 height -150 c union the cone and cylinder - fig e 9 Select the SHELL icon from the Solids Editing toolbar and prompt Select a 3D solid respond pick any point on the composite then right-click enter prompt Enter the shell offset distance enter 10 R then X R and X R 10 The cylinder cone is offset by 10 in all directions - fig f 11 Hide the model then regen 12 With the EXTRUDE FACES icon a pick any point on the top face b extrusion height -10 c angle of taper 0 - fig g 13 Repeat the extrude faces command and a pick any point 4 on the new rim of the composite b extrusion height 50 c angle of taper 5 - fig h This completes the third solids editing example. Other solids editing options Not all of the solids editing options have been used in the worked examples. The following is a brief description of those not considered a Clean removes all redundant edges and vertices . imprinted edges b Separate separates 3D solid objects with disjointed volumes into independent 3D objects. It DOES NOT separate composites created by Boolean operations into the original primitives. c Check confirms that a selected object is a valid ACIS solid d Color Edges Faces a very useful option as it allows individual edges and faces to be coloured . a cube could be created on layer MODEL red and the six faces of the cube assigned different colours. e Copy Edges Faces should be obvious f Delete faces allows faces of a model to be deleted but the option has obvious limitations. Useful with fillet chamfer edges.

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.