TAILIEUCHUNG - Propeller LED display

Sensor used in this project is MOC 7811 from Motorola. This is a slotted coupler/interrupter device. In each revolution as the beam is interrupted, the sensor generates a positive pulse. Microcontroller will execute interrupt routine, When a pulse occurs. Interrupt routine measures the total time taken for one revolution, divides it by 120, and stores the result into another timer, Configured in auto-reload mode. Now, the timer overflows after tiny intervals of time. Each time it overflows, next stored value is called from the lookup table, and displayed

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.