TAILIEUCHUNG - Cisco Systems - Starting a Router

Upon completing this lesson, you will be able to: Start a router and recognize the normal boot sequence Use the command-line interface to interact with the Cisco IOS software, given an operational router Use the online help facilities associated with the command-line interfaces, given an operational router | © 2002, Cisco Systems, Inc. All rights reserved. © 2002, Cisco Systems, Inc. All rights reserved. Starting a Router Objectives Upon completing this lesson, you will be able to: Start a router and recognize the normal boot sequence Use the command-line interface to interact with the Cisco IOS software, given an operational router Use the online help facilities associated with the command-line interfaces, given an operational router System startup routines initiate router software Router falls back to startup alternatives if needed Initial Startup of the Cisco Router Purpose: This slide describes a high-level overview of the startup sequences on the router. Emphasize: A detailed flowchart covers this in much more detail in Chapter 6, “Catalyst Switch Operations.” Config register is also covered in Chapter 6. The startup routines for Cisco IOS software have the goal of starting router operations. The router must deliver reliable performance connecting the user networks it was .

• Quản trị mạng
• Cisco Systems
• Network Devices
• computer
• businesses
• technology operational
• Cisco IOS
• Starting a Router
• Managing Cisco IOS devices
• Cisco router
• Cấu hình cisco router
• Chức năng cisco router
• Tài liệu IT
• cisco systems – inc
• Tập đoàn hệ thống Cisco
• khách hàng và đối tác
• sản phẩm và dịch vụ
• quy trình đặ hàng
• xử lý đơn hàng
• cisco exam
• cisco CSIDS
• Switching
• management network
• Cisco Switches
• PIX Firewall
• information technology
• international certification
• network cisco
• network Systems
• Cisco TelePresence System
• Linux system
• Starting a switch
• Configuring a Router
• network environment
• remove devices
• Router startup
• switch operations
• Redundant topology overview
• tree protocol overview
• Configuring a catalyst switch