TAILIEUCHUNG - Configuring Telnet on Windows 2000

The ABC Company has just installed a server running Windows 2000. The company has asked that Telnet services be configured so that the workstation can be remotely administered using Telnet. | Lab Configuring Telnet on Windows 2000 Linux Server Workstation or another server Estimated Time 40 Minutes Objective In this lab the student will learn how to configure Telnet services on Windows 2000. Equipment The following equipment is required for this exercise A system running Windows 2000 Professional Network connection from the workstation to hub or switch PC with a Telnet client program connected to the same hub or switch Scenario The ABC Company has just installed a server running Windows 2000. The company has asked that Telnet services be configured so that the workstation can be remotely administered using Telnet. Procedures Before beginning this lab make sure that both the Windows 2000 workstation and the other PC are ready for log in. Power these hosts on if necessary. This activity requires that the PC be connected to at least one other host on the same IP network. Verify that the Ethernet connections are in place. If using a hub or switch check the LED lights to verify a connection. Finally ask the instructor or a lab technician for the appropriate IP address information 1 - 1 IT Essentials II - Lab Copyright 2002 Cisco Systems Inc. for both hosts. Record that information in the tables provided Connected Host IP Address Configuration IP address Subnet mask Default gateway Local Host IP Address Configuration IP address Subnet mask Default gateway Record the IP address of the server and workstation in the boxes provided in the network diagram. Step 1 Log in to Windows 2000 Once the Windows server boots the Welcome to Windows dialog box appears. Log in as the administrator. Step 2 Setting the IP address Configure the Windows 2000 workstation IP address subnet mask and default gateway to match the information entered in the table. If this information has already been configured in a previous lab get the other workstation s information. Configure the workstation IP stack accordingly. Use ping to verify that the server can communicate. .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.