TAILIEUCHUNG - Ethernet Network Interface Unit Intelligent Ethernet Management Platform

For Ethernet services to fully deliver on the promise of lower costs and higher reliability, remote management of the network becomes essential—especially as subscriber numbers increase. Remote isolation of troubles and performance monitoring are minimum requirements for carrier-class Ethernet service. | Ethernet Network Interface Unit Intelligent Ethernet Management Platform For Ethernet services to fully deliver on the promise of lower costs and higher reliability remote management of the network becomes essential especially as subscriber numbers increase. Remote isolation of troubles and performance monitoring are minimum requirements for carrierclass Ethernet service. Service providers can now create an intelligent Ethernet management platform with ADC s Ethernet Network Interface Unit ENIU . Installed at the remote premises the ENIU provides the demarcation point between the customer and carrier network. By providing the ability to sectionalize the network at the customer interface the ENIU enables the carrier to remotely assess whether trouble conditions reside within the carrier or customer network. Benefits Features SPEC SHEET Saves operations time by limiting technician dispatch for troubleshooting and turn-up. Reduces network downtime through proactive network management via remote access for testing and performance monitoring. Enables quicker service restoration through single end testing of signal. Increases network availability by accelerating network trouble repair cycle. Easily integrates Ethernet network management into existing operations by mirroring current maintenance practices for DS1 DS3 architectures. Standards-based solution allows interoperability with switches routers and test equipment. Supports in-band remote signal loopback for troubleshooting and testing as well as remote failure indications and link monitoring for checking service performance. Features UTP RJ45 or SFP-based optical connections for customer and carrier interface. Loss of power cut through ensures that electrical signal integrity is maintained on RJ45 interfaces if power to the unit is lost. Configurable to 10Mbps or 100Mbps Ethernet or Gigabit Ethernet on carrier and customer demarcation sides. Bandwidth can be port limited in 1Mb increments. Includes enclosed .

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.