TAILIEUCHUNG - SONEPLEX STREAKER MODULE

he Soneplex Streaker (STK) module is an optional, low-cost maintenance module used to verify local wiring in a central office environment from the main distribution frame (MDF) to a Soneplex Broadband or Loop Extender System or from the Soneplex Loop Extender System to a DSX panel | SONEPLEX Streaker Module The Soneplex Streaker STK module is an optional low-cost maintenance module used to verify local wiring in a central office environment from the main distribution frame MDF to a Soneplex Broadband or Loop Extender System or from the Soneplex Loop Extender System to a DSX panel. ADC s Soneplex system is the lowest total cost solution for carriers to grow their T1 business services. Focused on providing flexible end-to-end solutions the Soneplex system saves carriers money on T1-based services over fiber or copper using HDSL ADSL traditional T1 repeater or Optical DS2 technology in a single platform. From operations maintenance provisioning and high-speed backbone connections to central office space and cabling the Soneplex system is designed to take costs out of today s T1 delivery approach adding profit to your bottom line. FEATURES Verifies continuity of the tip and ring in DS1 loops between MDF and chassis or between chassis and DSX panel Front panel controls and LED indicators Front panel test jacks for intrusive DS1 testing and power supply measurement The Soneplex System from ADC. The T1 E1 Service Delivery Expects Soneplex Streaker Module Description The Soneplex Streaker Module may be used in both the Soneplex Broadband chassis and the Soneplex Loop Extender chassis. When used in the Soneplex Broadband chassis however the DSX LED and test jacks are not used since the STK interfaces with the central office through the DS3 MUX in the chassis. The STK can be self powered operating from its own 6-volt battery supply or draw from the power supplied to the chassis. To use the module the installer maintenance engineer plugs the module into the chassis slot wired with the DS1 loop. When the tip or ring at the far end of the loop is grounded the respective LED on the STK front panel should light indicating circuit continuity. If both the tip and ring LEDs light when either lead is grounded there is low impact impedance between the leads or .

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.