TAILIEUCHUNG - Cutaway models

The air-conditioning is based on a supplementary equipment kit for the Audi A4. It is driven by a electric motor (400V, 3-phase). The painted stator is equipped with steering brake rollers and has a 12V battery under the air-condition unit and a storage compartment for measuring equipment. The unit is already filled with coolant and can be oprated without additional equipment. All the test connections for measurements exists. The 12V and 400V switch can be locked, two keys are supplied. | HAKO cut-away models - News Order no. 1241 Haldex Clutch - Parts cut in this model solenoid switch housing and windings - armature can be rotated and solenois switch actuated - engaging the starter pinion can be demonstrated TECHNOLAB SA Rotherdweg 16 Postfach CH-5022 Rombach - Switzerland Tel 41 62 827 11 11 - Fax 41 62 827 11 70 - e-mail info@ - 1 HAKO cut-away models - News Order no. 1237 Air- conditioning The air-conditioning is based on a supplementary equipment kit for the Audi A4. It is driven by a electric motor 400V 3-phase . The painted stator is equipped with steering brake rollers and has a 12V battery under the air-condition unit and a storage compartment for measuring equipment. The unit is already filled with coolant and can be oprated without additional equipment. All the test connections for measurements exists. The 12V and 400V switch can be locked two keys are supplied. Order no. 1243 Data bus In the Daimler Benz Actros a data bus is used instead of the harnesses used up to now. Signals are sent via 3 lines for each consumer and the corresponding consumers actuated via a decoder and encoder transmitter and receiver . In our model the consumers of a door are actuated mirror adjustment in 2 directions mirror heating central locking window winders and one light . The actuation of the consumers can be measured via measurement bushes. The data signals can be portrayed with any customary oscilloscope. The Multiplex data bus replaces an entire cable tree with one data line. TECHNOLAB SA Rotherdweg 16 Postfach CH-5022 Rombach - Switzerland Tel 41 62 827 11 11 - Fax 41 62 827 11 70 - e-mail info@ - 2 HAKO cut-away models - News Order no. 1242 VE pump electronically controlled with solenoid valve The basic set-up is similar to that of conventional VE pumps. In addition the pump has a solenoid valve for quantity control a digital-incremental distance measurement and its own pump control .

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.