TAILIEUCHUNG - HVAC Systems Design Handbook part 8

HVAC systems are sized to satisfy a set of design conditions, which are selected to generate a maximum load. Because these design conditions prevail during only a few hours each year, the HVAC equipment must operate most of the time at less than rated capacity. The function of the control system is to adjust the equipment capacity to match the load. | Source HVAC Systems Design Handbook Chapter 8 Design Procedures Part 6 Automatic Controls Introduction HVAC systems are sized to satisfy a set of design conditions which are selected to generate a maximum load. Because these design conditions prevail during only a few hours each year the HVAC equipment must operate most of the time at less than rated capacity. The function of the control system is to adjust the equipment capacity to match the load. Automatic control as opposed to manual control is preferable for both accuracy and economics the human as a controller is not always accurate and is expensive. A properly designed operated and maintained automatic control system is accurate and will provide economical operation of the HVAC system. Unfortunately not all control systems are properly designed operated and maintained. The purpose of this chapter is to discuss control fundamentals and applications in a concise and understandable manner. For a yet more detailed discussion see the references at the end of the chapter. The diagrams shown are generic and use symbols defined in Fig. at the end of the chapter. Control systems for HVAC do not operate in a vacuum. For any air conditioning application first it is necessary to have a building suitable for the process or comfort requirements. The best HVAC system cannot overcome inherent deficiencies in the building. Second the HVAC system must be properly designed to satisfy the process or comfort requirements. Only when these criteria have been satisfied can a suitable control system be implemented. 223 Downloaded from Digital Engineering Library @ McGraw-Hill Copyright 2004 The McGraw-Hill Companies. All rights reserved. Any use is subject to the Terms of Use as given at the website. Design Procedures Part 6 224 Chapter Eight Control Fundamentals All control systems operate in accordance with a few basic principles. These must be understood as background to the study of

• Kỹ thuật lập trình
• thủ thuật máy tính
• mạng máy tính
• tài liệu về internet
• phần mềm HVAC
• ứng dụng lập trình HVAC
• HVAC Systems Design Handbook
• Design Procedures
• Automatic Controls
• Lắp ráp máy tính
• Bảo trì máy tính phần 1
• Phần cứng máy tính
• Bảo dưỡng PC
• Thủ thuật PC
• Sửa lỗi máy tính
• Cài đặt máy tính
• tốc độ máy tính
• Thủ thuật tối ưu ổ cứng
• thủ thuật máy tính
• mẹo sử dụng máy tính
• phần mềm máy tính
• trích xuất hình ảnh
• biến video thành ảnh động
• sao chép đĩa
• mẹo tạo ổ CD
• mẹo cấm sao chép dữ liêu
• quản lý dữ liệu
• Thủ thuật sao lưu email
• hộp thư Gmail
• tiện ích gmail
• dọn dẹp hôp thư mail
• Engineering Fundamentals
• Equipment Selection
• Air Handling Systems
• Fluid Handling Systems
• Central Plants
• Equipment Cooling
• Heating
• Electrical Features of HVAC Systems
• Design Documentation
• construction to operation
• Technical Report Writing
• Fluid Mechanics
• Engineerig Fundamentals
• Thermodynamics
• heat transfer