TAILIEUCHUNG - Effect of Quenching media on distortion of C-ring specimen made by 100Cr6 steel - simulation and experiment

Polymer quenchants based on polyalkylene glycols (PAG) are currently the most widely used type of aqueous quenchants. In this paper, the numerical simulation method by Sysweld software was used to predict the distortions of C-ring model using 100Cr6 steel when quenched in the difference media. The simulation results are in good agreement with the experimental values, and they also showed that the top of C-ring was opened after deformation. The gap opening of C-ring specimens when quenched in PAG 20% solution is the smallest in comparison to the specimens quenched in water, oil and PAG 10% solutions. On the other hand, the research results also show that the distortion at the top of C-ring is the largest and they are decreased from the top downward the bottom of C-ring. |

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.