TAILIEUCHUNG - Effect of moisture and machine parameters on de-husking efficiency of Kodo millet

Studies on engineering properties of variety JK 41 Kodo (Paspalum scrobiculatum L.) was conduct at 12 and 14 % moisture content wet basis (). The average length, width, thickness, size and sphericity of Kodo millet at 12% moisture content () were mm, mm, mm, mm and % respectively. However, the average values of length, width, thickness, size and sphericity of Kodo millet at 14% moisture content () were mm, mm, mm, mm, and respectively. It was observed that the bulk density of Kodo millet decreased with increase in moisture content. The average value of bulk density of Kodo millet at 12% and 14% moisture content were and kg/m3 , respectively (Balasubramanian and Vishwanathan, 2010) also observed that the bulk density of millets decreased linearly with increment the moisture content. The average value of angle of repose for the Kodo millet increased from ⁰ to ⁰ with increment in moisture content (.) from 12% and 14% (Sirsat and Patel, 2008; Balasubramanian and Vishwanathan, 2010) also observed the increment in angle of repose of Kodo millet with increment in moisture content. The Kodo millet de-husker composed of three basic units . feeding unit, de-husking unit and discharge unit. The maximum de-husking efficiency of and for pretreated Kodo millet at 14% moisture content (.) with mm and mm clearance between the abrasive surfaces, was obtained at 380 rpm respectively at the feed rate of 12 kg/hr. Cost of dehusking per kilogram of Kodo millet was Rs. . | Effect of moisture and machine parameters on de-husking efficiency of Kodo millet

TỪ KHÓA LIÊN QUAN
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.