TAILIEUCHUNG - Parametric and working fluid analysis of a combined organic Rankine-vapor compression refrigeration system activated by low-grade thermal energy

The potential use of many common hydrofluorocarbons and hydrocarbons as well as new hydrofluoroolefins, . R1234yf and R1234ze(E) working fluids for a combined organic Rankine cycle and vapor compression refrigeration (ORC-VCR) system activated by low-grade thermal energy is evaluated. The basic ORC operates between 80 and 40 C typical for low-grade thermal energy power plants while the basic VCR cycle operates between 5 and 40 C. The system performance is characterized by the overall system coefficient of performance (COPS) and the total mass flow rate of the working fluid for each kW cooling capacity (m_ total). The effects of different working parameters such as the evaporator, condenser, and boiler temperatures on the system performance are examined. The results illustrate that the maximum COPS values are attained using the highest boiling candidates with overhanging T-s diagram, . R245fa and R600, while R600 has the lowest m_ total under the considered operating conditions. Among the proposed candidates, R600 is the best candidate for the ORC-VCR system from the perspectives of environmental issues and system performance. Nevertheless, its flammability should attract enough attention. The maximum COPS using R600 is found to reach up to at a condenser temperature of 30 C and the basic values for the remaining parameters. | Parametric and working fluid analysis of a combined organic Rankine-vapor compression refrigeration system activated by low-grade thermal energy

• Hoá học
• Working fluids
• Organic Rankine cycle
• Compression refrigeration cycle
• Combined cycle
• Low grade thermal energy
• The metalworking fluids
• Corrosion inhibitors
• Aganonerion Polymorphum leaf extract
• The Aganonerion Polymorphum leaf extract
• The electrochemical corrosion reactions
• Thermodynamic System
• Thermodynamics working fluids
• Laws of Thermodynamics
• Thermodynamic properties
• Quality of the working Substance
• Thermodynamic Processes