TAILIEUCHUNG - CCNA Wireless Official Exam Certification Guide part 40

CCNA Wireless Official Exam Certification Guide part 40 is a best of breed Cisco® exam study guide that focuses specifically on the objectives for the CCNA® Wireless IUWNE exam. Senior instructor Brandon Carroll shares preparation hints and test-taking tips, helping you identify areas of weakness and improve both your conceptual knowledge and hands-on skills. Material is presented in a concise manner, focusing on increasing your understanding and retention of exam topics. | 362 CCNA Wireless Official Exam Certification Guide Figure 18-2 WCS Home Page Tabs Administration Settings Data Management. You can also configure the WCS to send email to a user when an event is triggered. To configure the email preferences go to Administration Settings Mail Ser ver. Adding Controllers to the WCS To add controllers to the WCS use the Configure tab. From there you cannot only add controllers but you can configure APs. You can also create templates here that allow the deployment of common configurations among multiple devices. To add controllers browse to Configure Controllers as shown in Figure 18-3. The Configure Controllers page summarizes all the controllers in the WCS and allows you to add controllers. Using the Select a command drop-down seen in Figure 18-3 select Add Controller and then select GO. This takes you to the configuration page shown in Figure 18-4. Notice that the Add Format Type is configured for Device Info. The other option is File. You use the File option if you want to bring in several devices from a CSV file. When you add a controller to the WCS using the Device Info option you use SNMP. You need to enter the IP address of the device as well as the SNMP version retries timeout in seconds and community string. Click OK to apply. After you have added the controller you can configure it on an individual basis. This is good but the power of using the WCS comes in using templates. This is the second way you can configure the controller. The next section Working with Templates provides more information. Chapter 18 Enterprise Wireless Management with the WCS and the Location Appliance 363 Figure 18-3 Configuring Controllers in the WCS Key Topic Figure 18-4 Add Controller to the WCS 364 CCNA Wireless Official Exam Certification Guide You can also configure APs from the Configure menu by selecting Configure Access Points. As with controllers you can configure the APs using templates. You now have the WCS designed to manage many .

• Chứng chỉ quốc tế
• Luyện thi CCNA
• kỹ năng xử lý sự cố
• chương trình học viện mạng Cisco
• làm quen với quản trị mạng
• công nghệ Ethernet
• TCP IP
• phương tiện truyền thông mạng IP
• địa chỉ IP
• định tuyến giao thức
• chứng chỉ CCNA
• trắc nghiệm CCNA
• bài tập CCNA
• tài liệu CCNA
• Giáo trình CCNA
• Phần mềm CISCO
• Lập trình mạng
• CCNA1 Practice Final
• quản trị mạng
• luyện thi chứng chỉ quốc tế
• chương trình Cisco