TAILIEUCHUNG - Identificat ion of two phase flow regimes by void fraction measurements

This paper will present a method to identify flow patterns (bubble & slug flow) in vertical air-water two-phase flow by void fraction measurement (using an impedance probe) at Inst. of Mechanics Hanoi. | Vietnam Journal of Mechanics, VAST, Vol. 27, No. 1 (2005), pp . 59 - 65 IDENTIFICAT ION OF TWO PHASE FLOW REGIM ES BY VOID FRACTION MEASUREMENTS Bur DINH TRI Institute of Mechanics Abstract. This paper will present a method to identify flow patterns (bubble & slug flow) in vertical air-water two-phase flow by void fraction measurement (using an impedance probe) at Inst. of Mechanics Hanoi. 1. INTRODUCTION Identification of flow patterns is one of the most fundamental problems in investigating the basic phenomena of two-phase flow. At present, there are two available methods to identify two phases flow patterns: direct observation (including visualization, high speed photography, X-ray) and indirect determination (including measurement, the analytical tools such as probability density function (pdf) or power spectral density (psd), etc . ) However, this paper is only mentioned of an indirect determination method, which is generally preferable to direct observation at Inst. of Mechanics Hanoi. Void fract ion measurement of two-phase flow in the pipe is one of the indirect determination methods. There are many results of various authors which showed that the void fraction could be · used as a parameter to identify two-phase flow patterns, especially for gas-liquid two phase flow in the pipe. Y. Ma et al 1991 [1] and Wang et al 1991 [2] have proposed a simple and effective method (using the void fraction sensor) to identify the flow patterns. Costigan and Whalley 1997 [3] developed and used this method for slug flow regimes identification in vertical air-water flow. Recently, M. J. Watson and G. F . Hewitt 1999 [4] have carried out the investigation using the impedance probe to determine from the slug to churn flow pattern transition at various flow rate and pr,~ ssure in vertical upwards gas-liquid flow. In gerieral, most of previous investigations are based on a certain statistical analysis of fluctuating characteristics of the . In this paper, a method .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• Identificat ion of two phase flow regimes
• Void fraction measurements
• Vertical air water two phase flow
• Identify flow patterns
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure