TAILIEUCHUNG - Postbuckling of thick FGM cylindrical panels with tangential edge constraints and temperature dependent properties

This paper investigates postbuckling behavior of thick FGM cylindrical panels resting on elastic foundations and subjected to thermal, mechanical and thermomechanical loading conditions. Material properties are assumed to be temperature dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. | Vietnam Journal of Mechanics, VAST, Vol. 38, No. 2 (2016), pp. 123 – 140 DOI: POSTBUCKLING OF THICK FGM CYLINDRICAL PANELS WITH TANGENTIAL EDGE CONSTRAINTS AND TEMPERATURE DEPENDENT PROPERTIES Hoang Van Tung Hanoi Architectural University, Vietnam E-mail: inter0105@ Received September 21, 2015 Abstract. This paper investigates postbuckling behavior of thick FGM cylindrical panels resting on elastic foundations and subjected to thermal, mechanical and thermomechanical loading conditions. Material properties are assumed to be temperature dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. Governing equations are based on higher order shear deformation shell theory incorporating von Karman-Donnell geometrical nonlinearity, initial geometrical imperfection, tangential edge constraints and Pasternak type elastic foundations. Approximate solutions are assumed to satisfy simply supported boundary conditions and Galerkin procedure is applied to derive expressions of buckling loads and load-deflection relations. In thermal postbuckling analysis, an iteration algorithm is employed to determine critical buckling temperatures and postbuckling temperaturedeflection equilibrium paths. The separate and simultaneous effects of tangential edge restraints, elastic foundations and temperature dependence of material properties on the buckling and postbuckling responses of higher order shear deformable FGM cylindrical panels are analyzed and discussed. Keywords: Functionally graded materials, tangential edge constraint, cylindrical panel, buckling and postbuckling, elastic foundations. 1. INTRODUCTION Structural elements in form of cylindrical panels are widely used as major portions in the construction of aircraft, missile and aerospace vehicle. Cylindrical panels also find their important applications in building construction, underground structures and

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• Postbuckling of thick FGM cylindrical panels
• Tangential edge constraints
• Temperature dependent properties
• Thermomechanical loading conditions
• The volume fractions of constituents
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure