TAILIEUCHUNG - A simple weak form for contact problems with coulomb friction

This paper proposes a weak form for the contact problem with Coulomb friction, written as extension of the standard virtual work principle and involving both the displacements and the multipliers defined on the reference contact surface. The mixed relationship is shown to be equivalent to the strong form of the initial/boundary value contact problem, and it can be discretized by means of the finite element method in a simple way. | Vietnam Journal of Mechanics, VAST, Vol. 33, No. 4 (2011), pp. 259 – 282 A SIMPLE WEAK FORM FOR CONTACT PROBLEMS WITH COULOMB FRICTION 1 Nguyen Huynh Tan Tai1 and Le Van Anh2 Faculty of Civil Engineering, Thu Dau Mot University, Vietnam 2 Faculty of Science, University of Nantes, France Abstract. This paper proposes a weak form for the contact problem with Coulomb friction, written as extension of the standard virtual work principle and involving both the displacements and the multipliers defined on the reference contact surface. The mixed relationship is shown to be equivalent to the strong form of the initial/boundary value contact problem, and it can be discretized by means of the finite element method in a simple way. Typical numerical examples are given to assess the efficiency of the formulation in statics and dynamics. Key words: Contact, friction, finite element method. 1. INTRODUCTION Contact problems are of practical significance in mechanics and their solution is complex because of the nonlinear and non-smooth laws governing the interface response between the contacting bodies. When large deformations and large slips are involved, the problem becomes highly nonlinear and robust formulations must be designed with a view to efficiently solve it. Over more than three decades, a great number of formulations and solution methods have been proposed in the literature in order to deal with different kinds of contact problems encountered, from frictionless contact in linear elastostatics up to frictional contact in large deformation with complex material constitutive and interfacial contact laws, either in statics or dynamics. A complete review can be found in the books of Wriggers [1] and Laursen [2], where one can find a great deal of references related to the existing methods for the treatment of the contact constraints, in particular the classical Lagrange multiplier, the penalty and the augmented Lagrangian methods. The augmented Lagrangian methods are .

• Cơ khí - Chế tạo máy
• Vietnam Journal of Mechanics
• Simple weak form for contact problems with coulomb friction
• Contact problems with coulomb friction
• The finite element method
• The initial boundary value contact problem
• Dang Dinh Ang
• Nonlinear analysis and mechanics
• Dynamic problems involving stationary cracks
• The Wiener Hopt technique
• Dual integral equations
• Dual integrals in non linear fracture mechanics
• Non linear fracture mechanics
• Energy release rate
• Discuss the obtained
• The alpha finite element method (αFEM)
• Solid mechanics using triangular and tetrahedral elements
• Suitable computational cost
• NS FEM makes
• The upper bound property
• Non linear constitutive problems in solid mechanics
• Non linear constitutive problems
• Languages Gibian and special operators
• The application FEM
• Betts miller janjic convective parameterization scheme
• H14 31 model to forecast heavy rainfall in Vietnam
• Betts Miller Janjic
• Three rain seasons
• Manufacturing dry mixed cement mortar
• High compressive strength
• High flexural strength
• Low shrinkage and high watertightness for restoration
• Damaged hydraulic structures in Vietnam
• Standard gradient models and crack simulation
• Standard gradient models
• The propagation of cracks
• Damage mechanics and crack simulation
• The interaction between two parametric excitations
• The second and third degrees
• The asymptotic method of nonlinear mechanics
• Dynamic system governed
• Comparison of two hydrological model simulations
• Nam and Xinanjiang for Nong Son catchment
• The Central Vietnam
• The runoff components
• 3 D numerical simulation
• The tidal circulation
• The gulf of Tonkin
• The kinetic energy distribution
• Duality in the analysis of responses to nonlinear systems
• The analysis of responses
• The original nonlinear systems
• The study of nonlinear mechanics
• Aerodynamics of a wing in surface effect ship
• Theory and experiment
• Wing in surface effect ship
• The aerodynamic characteristics
• The Institute of Mechanics
• The error estimate
• The convergence rate for h
• p refinement
• The finite element analysis
• Three dimensional elastostatic mechanics problems
• Some initial experimental results
• Free water layer formation in horizontal pipes
• Water layer formation
• Hanoi Institute of Mechanics
• Bending vibration of beam elements under moving loads
• Considering vehicle braking forces
• Fluctuations of structures
• Beam elements according
• Continuous element for vibration analysis
• Thick shells of revolution
• Continous Element Method
• Finite element solutions
• Natural frequencies and harmonic responses
• Cast3m implementation of the extended finite element method
• The extended finite element method for cohesive crack
• Quasi brittle materia
• The proposed implementation
• The displacement discontinuities
• Buckling analysis of simply supported composite laminates subjected
• In plane compression load
• A novel mesh ffree method
• Alternative numerical technique
• Mesh free method
• A three story building
• Hedge algebras based fuzzy controller
• The structural system
• The El Centro earthquake
• Three story building against earthquake
• Laminar separation phenomenon combining with numerical calculations
• The turbulent separation
• The laminar separation
• Experimental study on mechanical properties
• Three phase polymer composite reinforced
• Glass fibers and titanium oxide particles
• Polymer composite reinforced
• Three phase composite
• Dynamic characteristics of elastically supported beam subjected
• A compressive axial force and a moving load
• The implicit Newmark method
• The Galerkin finite element method
• The axial force
• Eccentrically stiffened functionally graded plates and shallow shells
• Von Karman Donnell sense
• The formulation of governing equations
• The classical shell theory
• Mathematical modelling and control of the evolution
• Dynamic systems interacting with medium
• Mathematical modeling evolutional systems interacting
• Two conjugate mechanical subsystems
• Evaluating structural safety based on fuzzy set theory
• Evaluating structural safety
• The fuzzy reliability
• Simple beam structure