TAILIEUCHUNG - A feasibility study in application of a gamma scattering technique for inspecting density variation by monte carlo method

This work aims to investigate the feasibility of application of gamma scattering technique for inspecting density variation in some construction objects by Monte-Carlo simulation method. The gamma-ray sources of different energies and strengths have been used to extract the information of density variation for interior of sample by recording the backscattering gamma-rays with a gamma-ray detector. The results of our simulations confirm that the resolution for density variation in the inspected objects is quite good. The results should also prove useful in the optimum design of the nondestructive density gauges. | Communications in Physics, Vol. 22, No. 3 (2012), pp. 275-281 A FEASIBILITY STUDY IN APPLICATION OF A GAMMA SCATTERING TECHNIQUE FOR INSPECTING DENSITY VARIATION BY MONTE CARLO METHOD LE HONG KHIEM, TRAN DINH TRONG Center for Nuclear Physics, Institute Of Physics, VAST NGUYEN VAN THAO Center of Technology Development Assistance and Service, VAST Abstract. Back-scattering gamma-rays have been extensively used for years as a nondestructive tool for inspecting the materials in different fields of the economy. The intensities of Compton scattering gamma-rays from the scattering medium strongly depend on its electron density and therefore in its mass density. This feature is very useful for using these rays as a viable tool for inspecting material. This work aims to investigate the feasibility of application of gamma scattering technique for inspecting density variation in some construction objects by Monte-Carlo simulation method. The gamma-ray sources of different energies and strengths have been used to extract the information of density variation for interior of sample by recording the backscattering gamma-rays with a gamma-ray detector. The results of our simulations confirm that the resolution for density variation in the inspected objects is quite good. The results should also prove useful in the optimum design of the nondestructive density gauges. I. INTRODUCTION Back-scattering gamma rays have been extensively used for years as a nondestructive tool for inspecting the materials in industrial non-destructive testing instruments and techniques [1–3]. The intensities of Compton scattering gamma-rays from the scattering medium strongly depend on its electron density and therefore on its mass density. This feature is very useful for using back-scattering gamma-rays as a viable tool for inspecting material, especially for ascertaining quantitative information of density of an inspecting object. For example, in highway construction, two aspects are very important .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.