TAILIEUCHUNG - Windows Server 2008 Inside Out- P16

Tham khảo tài liệu 'windows server 2008 inside out- p16', công nghệ thông tin, quản trị mạng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả | Configuring TCP IP Options 717 IPAddress is the IP address for the lease you want to remove such as . To activate or deactivate a scope type the following netsh dhcp server ServerlD scope NetworkID state StateVal where the following is true ServerlD is the UNC name or IP address of the DHCP server on which you want to create the scope such as CORPSVR03 or . NetworkID is the network ID of the scope such as . StateVal is set to 0 to deactivate the scope and 1 to activate it. If you are using a switched network where multiple logical networks are hosted on a single physical network use 2 to deactivate the scope and 3 to activate the scope. Configuring TCP IP Options The messages clients and servers broadcast to each other allow you to set TCP IP options that clients can obtain by default when they obtain a lease or can request if they need additional information. It is important to note however that the types of information you can add to DHCP messages is limited in several ways DHCP messages are transmitted using User Datagram Protocol UDP and the entire DHCP message must fit into the UDP datagram. On Ethernet with 1500-byte datagrams this leaves 1236 bytes for the body of the message which contains the TCP IP options . BOOTP messages have a fixed size of 300 bytes as set by the original BOOTP standard. Any clients using BOOTP are likely to have their TCP IP options truncated. Although there are many options that you can set clients understand only certain TCP IP options. Thus the set of options available to you is dependent upon the client s implementation of DHCP. With that in mind let s look at the levels at which options can be assigned and the options that Windows clients understand. Levels of Options and Their Uses Each individual TCP IP option such as a default gateway is configured separately. There are different scope options for IPv4 and IPv6. DHCP administrators can manage options at five levels within the DHCP server .

TỪ KHÓA LIÊN QUAN
TAILIEUCHUNG - Chia sẻ tài liệu không giới hạn
Địa chỉ : 444 Hoang Hoa Tham, Hanoi, Viet Nam
Website : tailieuchung.com
Email : tailieuchung20@gmail.com
Tailieuchung.com là thư viện tài liệu trực tuyến, nơi chia sẽ trao đổi hàng triệu tài liệu như luận văn đồ án, sách, giáo trình, đề thi.
Chúng tôi không chịu trách nhiệm liên quan đến các vấn đề bản quyền nội dung tài liệu được thành viên tự nguyện đăng tải lên, nếu phát hiện thấy tài liệu xấu hoặc tài liệu có bản quyền xin hãy email cho chúng tôi.
Đã phát hiện trình chặn quảng cáo AdBlock
Trang web này phụ thuộc vào doanh thu từ số lần hiển thị quảng cáo để tồn tại. Vui lòng tắt trình chặn quảng cáo của bạn hoặc tạm dừng tính năng chặn quảng cáo cho trang web này.