Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Thông tin chung Các nhà sản xuất không chịu trách nhiệm cho bất kỳ hậu quả từ cài đặt không phù hợp, cẩu thả hoặc không chính xác, hoặc điều chỉnh các thông số hoạt động tùy chọn của thiết bị hoặc từ mismatching ổ đĩa tốc độ biến với động cơ. Nội dung của hướng dẫn này được cho là chính xác tại thời điểm in ấn. | EMERSON Industrial Automation Getting Started Guide Commander SK Model sizes 2 to 6 AC variable speed drive for 3 phase induction motors Part Number 0472-0064-07 Issue 7 rECHliilClUES www.controltechniques.com General Information The manufacturer accepts no liability for any consequences resulting from inappropriate negligent or incorrect installation or adjustment of the optional operating parameters of the equipment or from mismatching the variable speed drive with the motor. The contents of this guide are believed to be correct at the time of printing. In the interests of a commitment to a policy of continuous development and improvement the manufacturer reserves the right to change the specification of the product or its performance or the contents of the guide without notice. All rights reserved. No parts of this guide may be reproduced or transmitted in any form or by any means electrical or mechanical including photocopying recording or by an information storage or retrieval system without permission in writing from the publisher. Drive software version This product is supplied with the latest software version. If this drive is to be connected to an existing system or machine all drive software versions should be verified to confirm the same functionality as drives of the same model already present. This may also apply to drives returned from a Control Techniques Service Centre or Repair Centre. If there is any doubt please contact the supplier of the product. The software version of the drive can be checked by looking at Pr 11.29 and Pr 11.34. This takes the form of xx.yy.zz where Pr 11.29 displays xx.yy and Pr 11.34 displays zz. e.g. for software version 01.01.00 Pr 11.29 1.01 and Pr 11.34 displays 0 . Environmental statement Control Techniques is committed to minimising the environmental impacts of its manufacturing operations and of its products throughout their life cycle. To this end we operate an Environmental Management System EMS which is certified
