Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Tổng thời gian mô phỏng, trong giây. Thời gian từ kết quả mô phỏng được lưu vào tập tin đầu ra. Đầu ra không được lưu trước khi thời gian này. In bước. Nếu các bước in được thiết lập để 1, tất cả các điểm dữ liệu sẽ được lưu vào tập tin đầu ra. Nếu nó là 10, chỉ có một trong 10 điểm dữ liệu sẽ được lưu lại. | Subcircuit - Go back to the subcircuit window sub.sch in this case and save the subcircuit. The new subcircuit block image should appear in the main circuit. 6.3.4.3 Including Subcircuits in the PSIM Element List If you create a directory called User Defined under the PSIM directory and place subcircuits inside this directory. subcircuits will appear as an item in the Elements menu in PSIM under Elements User Defined just like any other PSIM elements. You can also create subdirectories under the directory User Defined and place subcircuits inside the subdirectories. For example the Elements menu may look like this - Power - Control - Other - Sources - Symbols - User Defined - Subcircuit 1 - Project A - Subcircuit 2 - Subcircuit 3 - Project B - Subcircuit 4 In this way common-used custom-built subcircuits can be grouped together and easily managed and accessed. PSIM User Manual 6-9 Chapter 6 Circuit Schematic Design 6.4 Other Options 6.4.1 Simulation Control Before a circuit can be simulated simulation control parameters must be specified. By choosing Simulation control in the Simulate menu an image of a clock will appear on the screen. After double clicking on the clock simulation control parameters can be specified. Refer to Section 4.1 for more details on simulation parameters. 6.4.2 Running the Simulation To run the simulation choose Run PSIM from the Simulate menu. This will start the PSIM simulator. To view the simulation results choose Run SIMVIEW from the Simulate menu. Refer to Chapter 7 for the use of SIMVIEW. 6.4.3 Generate and View the Netlist File To generate the netlist choose Generate Netlist File from the Simulate menu. This will create the netlist file with the .cct extension. The netlist file will be saved to the same directory as the schematic file. To view the netlist file choose View Netlist File from the Simulate menu. 6.4.4 Define Runtime Display One can view selected waveforms as the simulation runs. This is useful if one wishes to monitor .
