Đang chuẩn bị nút TẢI XUỐNG, xin hãy chờ
Tải xuống
Mặc định là 2 giây. Đối với các lệnh chuyển tiếp thời gian, phạm vi là 4-30 giây. Mặc định là 15 giây. Đối với các lệnh trong độ tuổi tối đa, phạm vi là 6-40 giây. Mặc định là 20 giâyTHẬN TRỌNG: Cisco khuyến cáo thận trọng khi sử dụng lệnh này. | Wireless Access Point Configuration Linksys 300N Access Point 167 steps you can click Review instructions from the screen in Figure 15-10 to start over. If not click Next to continue. The Setup Wizard checks your computer settings so you will see a timer bar appear over the top of the wizard as shown in Figure 15-11. Figure 15-15 Check the Router s Status Figure 15-16 Checking Your Computer s Settings 168 Wireless Access Point Configuration Linksys 300N Access Point Next you need to set up the different parameters of the router to connect different devices to it. The first parameter is DHCP. The screen in Figure 15-12 shows a few different options from which to select. If you are unsure about what to select do not select anything. This example assumes that you are plugged into a cable modem so you leave this setting at the default Cable DHCP . Figure 15-17 Configure Cable or DHCP Settings The next step is to set an administrative password. Do not leave the password at the default setting. If you want to have this password saved on the local computer select the Remember my password on this computer check box as shown on the screen in Figure 15-13. After you set and confirm the password click Next. The router checks settings and then progresses to the next screen in the wizard. Figure 15-14 shows the beginning of the wireless setup on the router. Here you are asked for the name of your wireless network and what channel you want to use. The name will be your service set identification SSID and this name must be used by any device wanting to connect to this AP. To ensure the least amount of interference from other wireless installations limit your choices of channel number to 1 6 or 11 because these channels do not overlap with each other. Wireless Access Point Configuration Linksys 300N Access Point 169 Figure 15-18 Set the Router s Administrative Password Figure 15-19 Wireless .
